Modell: KH-800GFT
1. Specification of natural gas genset | ||||||||
Genset model | KH-800GFT | |||||||
Prime power | 1000KVA | |||||||
Voltage | 400/230V | |||||||
Frequency | 50Hz | |||||||
Speed | 1500rpm | |||||||
Power Factor | 0.8(lagging) | |||||||
Dimensions(mm) (L×W×H) | 5060x2350x2650 | |||||||
Genset Weight(kg) | 9300kg | |||||||
KH-600GF natural gas genset | Data of Technology | |||||||
Emission standard | mg/m³ | EII | ||||||
Intake Air Temperature | Deg C | <45 | ||||||
Before Air to Air | Deg C | 82-87 | ||||||
After Air to Air | Deg C | 35-42 | ||||||
Generator Data | ||||||||
Rated power factor | 0.8 | Operation Continous/KW | 800 | |||||
Full power | KW | 2210 | ||||||
Electric Efficiency | % | 36.2 | ||||||
Thermal Efficiency | % | 87.9 | ||||||
Engine Data | ||||||||
Fire order | 1R-1L-3R-3L-2R-2L-5R-4L-8R-8L-6R-6L-7R-7L-4R-5L | |||||||
Over speed | rpm | 2160 | ||||||
Over RPM | rpm | 2160 | ||||||
Oil | L | 177 | ||||||
Water | L | 210 | ||||||
Back pressure | kpa | 6.8 | ||||||
Comsumption | ||||||||
Natural gas(based on 36Mj/cube) | m3/kw•h | < 0.3 | ||||||
Oil | g/kWh | < 1.6 | ||||||
Thermal Radiation | ||||||||
water radiator and oil radiator | KW | 256 | ||||||
Exhaust pipe(based on 120 degree) | KW | 304 | ||||||
Engine | KW | 40 | ||||||
Alternator | KW | 16 | ||||||
Coolant system | ||||||||
Water temperature | Deg C | 95 | ||||||
Oil temperature | Deg C | < 120 | ||||||
Exhaust pipe(based on 120 degree) | KW | 760 | ||||||
Exhaust pipe System | ||||||||
Before turbo charger | Deg C | 665±15 | ||||||
Ratio of exhaust flow | m³/h | 9000 | ||||||
Ratio of Fan | m³/s | 21 | ||||||
2. Specification of gas engine | ||||||||
Natural gas engine is lean burn | ||||||||
16NG13-880G 4-Stroke, Spark for combustion | ||||||||
Engine cylinder | v- 16 | |||||||
Bore×Stroke (mm×mm) | 159 x 159 | |||||||
Displacement (Liter) | 50.3 | |||||||
Compressure Ratio | 9.5:1 | |||||||
Adimission | Aspirate/Turbo charger | |||||||
Coolant | Forced Water Cooling Cycle | |||||||
Fuel pressure | Low and high | |||||||
Speed controller | GAC of USA | |||||||
3. Specification of alternator | ||||||||
Alternator brand | Engga | |||||||
Alternator model | EG400L-800N | |||||||
Excitation | Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire | |||||||
Winding pitch | 2/3 pitch | |||||||
Poles | 4 | |||||||
Bearing | 1 | |||||||
Stator winding | 12 | |||||||
Insulation | H | |||||||
Protection | IP21 | |||||||
Duty type | Continuous | |||||||
AVR type | WT-2 | |||||||
Base line | Fly wheel | |||||||
Temperature rise | <125 Degree | |||||||
Overload (100% load) | 110% load 1H | |||||||
Waveform THD | <5% | |||||||
Adjustment for Voltage | AVR | |||||||
Adjustment Ratio for Voltage | ±5% | |||||||
Voltage regulation | ±1% | |||||||
No load voltage waveform | <2% | |||||||
WaveformTIF | < 50 | |||||||
4. Smartgen Controller | ||||||||
24V starter; IP44 level dustproof; Metal box to protected water; dust port can be long-range; switch is for turn on/off by automatic; output/input can reset; malfunction indicated or stop running by automatic;digial display in-out put by relay | ||||||||
Indicate following information by LED: | ||||||||
engine RPM; operation time; oil pressure; water temperature; bettray; generator phine-Valtage; generator phine-current; generator frenquence; Function of Alam; oil Low pressure; water temperature; malfunction of charger; speed high/low; mal-start; generator stop running; mal-restart; losing speed signal; protect progamm; Volt low or high; Frequence low or high; over current; reverse power |
Produktgruppe : Gas-Generator-Sets