Produktbeschreibung Generator 2MW Dieselkraftwerk ----------------- <products infomation> ------------------- Generatoren können als verwendet werden Sichern Sie die Stromversorgung sowie die Stromversorgung. Manchmal, um cutomers ununterbrochene massive Macht zur Verfügung zu stellen, sind wir professionell, mit Dieselgeneratorkraftwerklösungen zu liefern. Das Generatorkraftwerk besteht normalerweise aus mehreren Dieselgeneratoren, Schalttafeln, ankommenden Schränken, Auslassschränken usw. ----------------------- <unser Service> - ---------------------- Wir haben ein professionelles Team, das mit Lösungen und Zeichnungen versorgt, um die lokalen Kundenanforderungen zu erfüllen. Bis jetzt haben wir erfolgreich viele Kraftwerksprojekte im In- und Ausland durchgeführt. Herzlich willkommen schätzen Kunden freundliche Anfrage und Anregungen. ----------------- <Produkte Technische Daten> -------------

1. Specification of genset
Gensets model				KH-1000GF
Prime power				1250KVA
Rated Voltage				380/220V
Rated frequency(HZ)				50
Rated Speed				1500rpm
Power Factor(COS)				0.8(lagging)
Dimensions(mm) (L×W×H) - Silent type				9000x2800x3000
Net Weight(kg) - silent type				10000
2. Specification of diesel engine
Engine brand				Cummins, CCEC
Engine model				KTA50-G3
Number of Cylinders				16
Cylinder arrangement				in "V" type
Cycle				Four stroke
Aspiration				Turbo Charged
Bore×Stroke (mm×mm)				159 x 159
Displacement (Liter)				50.3
Compression Ratio				13.9:1
Maximum Standby Power at Rated RPM				1227KW/1669HP
Speed Governor				Electronic
Cooling System				Forced Water Cooling Cycle
Lub. oil capacity (L)				177
Fuel Consumption, Stand-by (L/h)				244.3
Starting Method				Electrical starting
3. Specification of alternator
Alternator brand				Marathone
Alternator model				MX-1030-4
Number of Phase				3
Connecting Type				3 Phases and 4 Wires
Number of Bearing				1
Protection Grade				IP23
Maximum Capacity				1375KVA
Altitude				≤1000m
Exciter Type				Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire
Insulation Class				H
Telephone Influence Factor (TIF)				≤50
THF				≤2%
Voltage Regulation, Steady State				≤±1%
Transient State Voltage				≤-15%~+20%

4. Specification of the Synchronizing Panel
• The DSE8610 is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines.
• The DSE8610 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.
• System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.
• Measure and display 3 phase voltage, 3 phase current, frequency, power etc. parameter of Mains and Gens;
• The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as comprehensive communication and system expansion options.
• Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports capable of being active at the same time, the DSE8610 is ideal for a wide variety of demanding load share application
• Control protection: Automatic crank/stop of diesel engine, load transfer (ATS control) and completely faults display protection;
Key Load Share Features:
• Peak lopping
• Sequential set start
• Manual voltage/frequency
• Adjustment
• R.O.C.O.F. and vector shift
• Generator load demand
• Automatic hours run balancing
• Mains (Utility) de-coupling
• Test mode
• Dead bus sensing
• Bus failure detection
• Direct governor and AVR control
• Volts and frequency matching
• kW and kV Ar load sharing

Produktgruppe : Dieselaggregate Power By CUMMINS Motor