Produktbeschreibung Spezifikationen 1000KW Dieselaggregat powered by MTU \ n1.Globale Garantie \ n2.CE Zertifikat \ n3.hohe Leistung \ n4.ISO9001: 2008 \ n \ n 1000KW Dieselgenerator angetrieben durch MTU Criterion (1) Europäischer Sicherheitsstandard: CER-Zertifikat (2) ISO9001: 2008 Qualitätskontrollsystem (3) ISO14001 Umweltzertifikat (4) Alibaba Goldlieferant

Technical Specification
1. Specification of genset
Gensets model				KH-1000GF
Prime power(KW)				1000
Rated voltage(V)				400/230
Rated current(A)				1800
Rated frequency(HZ)				50
Rated Speed (rpm)				1500
Power Factor(COSφ)				0.8(lagging)
Dimensions(mm) (L×W×H)				6150x2150x2400			open type
Genset Weight(kg)				12000
2. Specification of diesel engine
Engine brand				MTU
Engine model				12V4000G23
Air Intake System				Turbocharged, Air/Air Cooling
Fuel System				Electronic Fuel Injection System
Cycle				Four stroke
Cylinder Arrangement				12 in “V”
Displacement(L)				57.2
Bore×Stroke (mm×mm)				170 x 210
Compression Ratio				16.0:1
Cooling System				Forced Water Cooling Cycle
Prime power at Rated RPM(KW)				1320
Governor Type				ADEC
Fuel Consumption at 100% Load (g/kwh)				303.3
Starting Method				DC24V electrical starting
3. Specification of alternator
Alternator brand				Stamford
Alternator model				LVI634G
Exciting style				Brushless ,Self-exciting, AVR or DVR automatic voltage regulating,100% Copper winding wire
Number of Phase				3
Connecting Type				3 Phase and 4 Wires
Number of Bearing				1
Power Factor				0.8
Protection Grade				IP23
Altitude				≤1000m
Insulation Class, Temperature Rise				H
Telephone Influence Factor (TIF)				≤50
THF				≤2%
Voltage Regulation, Steady State				≤±1%
Transient State Voltage				≤-15%~+20%
4. Specification of control Panel(with Deepsea controller)
The control panel is AMF control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function.
The features of Deepsea controller:
Deepsea controller is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory.
The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED’s.
• True RMS measure of voltage and current.
• Multi-Language menu.
• 128 x 64 pixel LCD display.
• 4 analog inputs for kinds of optional sensors that can be used for measuring oil pressure, coolant temperature, fuel level and so on; parameters can be configured by user.
• More outputs of configurable auxiliary control relays.
• More configurable isolated digital inputs.
• Buttons on control panel are used for selecting control modes, starting and stopping the operating procedure, displaying data and modifying the parameters. LED indicators are used for indicating the operation mode of controller and the running status of Genset, and LCD displays each measuring parameter and status.
• Flexible equipped with RS485, RS232 and USB, realizing remote monitor; or communicated with PC, fully realizing functions of remote signaling, telemetering and remote control, can read and set the running parameters of controller.
• With GPRS-DTU or Ethernet-DTU for remote communication instead of RS485, RS232, or USB port for remote communication.
• Optional CANbus, read and control the parameters for ECU engine.
• All connections of the controller are by secure plug and socket, for ease and convenience to connect, move, maintain and replace the device.

Produktgruppe : Importieren der Marke Diesel-Generatoren > Diesel Generator Sets macht von MTU