Zahlungsart: | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
---|---|
Minimum der Bestellmenge: | 1 Set/Sets |
Lieferzeit: | 12 Tage |
Modell: Kh-8GF
1. Specification of genset | ||||||||
Gensets model | KH-10GF | |||||||
Prime power | 8KW | |||||||
Rated voltage | 400V | |||||||
Rated current | 18A | |||||||
Rated frequency(HZ) | 50HZ | |||||||
Rated speed | 1500rpm | |||||||
Power factor | 0.8(lagging) | |||||||
Dimensions(mm) (L×W×H) | 1600x750x1200 | |||||||
Genset Weight(kg) | 630 | |||||||
2. Specification of diesel engine | ||||||||
Engine brand | Daewoo | |||||||
Engine model | DW1.8-D4 | |||||||
Number of Cylinders | 4 | |||||||
Cylinder arrangement | Vertical in-line | |||||||
Cycle | Four stroke | |||||||
Aspiration | Natural aspiration | |||||||
Bore×Stroke (mm×mm) | 80 x 90 | |||||||
Displacement (Liter) | 1.81 | |||||||
Compression Ratio | 18.0:1 | |||||||
Speed Governor | Electronic | |||||||
Cooling System | Forced Water Cooling Cycle | |||||||
Lub. oil capacity (L) | 5 | |||||||
Fuel Consumption, Stand-by (L/h) | 4.3 | |||||||
Starting Method | Electrical starting | |||||||
3. Specification of alternator | ||||||||
Alternator brand | Stamford | |||||||
Alternator model | PI044F | |||||||
Number of Phase | 3 | |||||||
Connecting Type | 3 Phase and 4 Wires | |||||||
Number of Bearing | 1 | |||||||
Protection Grade | IP23 | |||||||
Altitude | ≤1000m | |||||||
Exciter Type | Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire | |||||||
Insulation Class | H | |||||||
Telephone Influence Factor (TIF) | ≤50 | |||||||
THF | ≤2% | |||||||
Voltage Regulation, Steady State | ≤±1% | |||||||
Transient State Voltage | ≤-15%~+20% | |||||||
4. Specification of control Panel(with GU620A controller) | ||||||||
The control panel is AMF control panel, with the display of voltage,current, frequency, water temperature, oil pressure. The genset with low oil pressure,high water temperature,over speed,over load protection function. | ||||||||
The features of GU620A controller: | ||||||||
Kaixun is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and perfectly improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory. | ||||||||
The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED’s. |
Produktgruppe : Daewoo-Diesel-Generatoren